Why Expansion Joint Replacement Matters
When expansion joints fail, water seeps beneath your concrete slabs, washing away the supporting soil and leading to cracking, settling, and uneven surfaces. Weeds and organic matter take root in open joints, widening the gap and causing further damage. Replacing deteriorated joints with a proper sand, foam, and sealant system stops water intrusion, prevents weed growth, and keeps your driveway and sidewalk looking clean and well-maintained.
Our Step-by-Step Process
We follow a proven, meticulous process for every joint replacement. First, we clean out all old, rotting wood, failing caulk, and packed dirt using a flathead screwdriver, wire brush, or drill with a nylon brush wheel — then vacuum thoroughly or use a leaf blower to remove all dust and loose material so the new materials bond properly. Next, we pour dry sand into the joint until it's a little more than halfway full and pack it down to create a stable, firm shelf. We then select a closed-cell foam backer rod slightly wider than the gap and press it tightly into the joint on top of the sand, setting it uniformly 1/4 to 1/2 inch below the surface to create a precise reservoir for the filler. Finally, we slowly squeeze a quality self-leveling concrete sealant (such as Sika Self-Leveling Sealant) into the joint, keeping the nozzle moving at an even pace so it flows smoothly just below the concrete edge. While the sealant is still wet, we lightly sprinkle dry sand over the top to blend the joint with the surrounding gray concrete — then, once a skin forms, we sweep or blow away the excess loose sand, leaving a clean, seamless finish.
Materials We Use
We use only high-quality, professional-grade materials for every expansion joint replacement. Our process combines dry general-purpose or play sand for a stable base, closed-cell foam backer rod sized to your specific joint width, and premium self-leveling concrete sealant — typically Sika Self-Leveling Sealant — for a flexible, waterproof, long-lasting fill. The final sand dusting helps the sealed joint visually blend with your existing concrete so the repair is nearly invisible.
