Fence & Deck Cleaning, Staining & Painting

Fence & Deck Cleaning, Staining & Painting in Austin, TX

Professional Wood Restoration That Brings Your Fence and Deck Back to Life

Austin's intense sun, humidity, and seasonal storms take a toll on wood fences and decks — turning them gray, weathered, and prone to rot. Pressure's On provides professional fence and deck cleaning, staining, and painting services throughout Austin, TX. Our proven two-step chemical process — a sodium hydroxide clean followed by an oxalic acid brightener — safely strips grime and old stain while restoring your wood's natural color. We then offer premium staining or painting to protect and beautify your wood surfaces for years to come.

Why Wood Needs Professional Cleaning

Over time, UV exposure breaks down the lignin in wood, causing it to turn gray and weathered. Mold, mildew, and algae growth compound the problem, leaving fences and decks looking old and neglected. Professional chemical cleaning is far superior to simple pressure washing alone — it removes embedded grime, old stain, and organic growth at the molecular level without gouging or damaging the wood fibers. Our two-step sodium hydroxide and oxalic acid process is the industry standard for safe, effective wood restoration.

Our Two-Step Wood Cleaning Process

Step 1 — The Sodium Hydroxide Clean: We pre-wet the wood with water, then apply a sodium hydroxide mixture (1/2 to 1 cup per gallon) using a plastic pump sprayer. The solution is allowed to dwell for 10 to 15 minutes — we mist with water if it begins to dry. During this time, the wood will temporarily turn dark brown as the caustic solution breaks down grime, old stain, and organic growth. We never mix sodium hydroxide with oxalic acid — they must be applied separately. Step 2 — The Oxalic Acid Brightener: Immediately after the low-pressure rinse, we apply an oxalic acid solution (1 cup per gallon of warm water) to the wet wood. The acid immediately neutralizes the high pH from the sodium hydroxide and restores the wood's natural color — you'll watch it lighten right before your eyes. We let it dwell for 5 to 10 minutes, then do a final low-pressure rinse. The wood is then left to dry for 48 hours before any stain or paint is applied.

The Pressure Washer Rinse

After the sodium hydroxide dwell, we rinse using low pressure — between 500 and 800 PSI — with a wide 40-degree white fan tip. We wash in long, continuous strokes along the grain of the wood, never stopping mid-board to prevent gouge marks. All soapy residue is thoroughly cleared before moving on to the brightener step. This low-pressure approach protects the wood fibers while effectively removing the broken-down grime and stain.

Staining & Painting Services

Once your fence or deck is clean and dry (after 48 hours), we offer professional staining and painting services to protect your freshly restored wood. We use premium wood stains and paints designed for Central Texas conditions — UV-resistant, water-repellent, and long-lasting. Whether you want a transparent stain that showcases the natural wood grain, a semi-transparent stain for added color and protection, or a solid stain or paint for full coverage, we'll help you choose the right product for your wood type and aesthetic goals. Proper staining extends the life of your fence or deck by years and keeps it looking fresh through Austin's harshest seasons.

Safety & Environmental Care

Sodium hydroxide is highly caustic, so safety is our top priority. Our team wears full personal protective equipment (PPE) — safety goggles, heavy-duty gloves, and respirators — throughout the process. We protect your landscaping by soaking nearby grass and plants with fresh water before application and continuously rinsing greenery to prevent chemical burns. Sodium hydroxide is always mixed in cold water, and oxalic acid is mixed in warm water to dissolve thoroughly. We never mix these two chemicals together. Your family, pets, and plants are kept safe throughout the entire process.

Why Choose Our Fence & Deck Cleaning, Staining & Painting

Restores Natural Wood Color

Our oxalic acid brightener brings gray, weathered wood back to its original tone.

Strips Old Stain & Grime

Sodium hydroxide breaks down old stain, mold, and embedded grime at the molecular level.

Low-Pressure Safe Cleaning

500–800 PSI with a 40-degree tip protects wood fibers from gouging and damage.

Staining & Painting

Premium stains and paints protect your wood from UV, moisture, and Austin's harsh climate.

Fence & Deck Cleaning, Staining & Painting FAQ

How much does fence or deck cleaning cost in Austin?

Pricing depends on the linear feet of fencing or square footage of decking, the wood type, and whether staining or painting is included. Most fence cleaning projects start around $150–$400, and deck cleaning starts around $200–$500. We provide free, upfront quotes tailored to your specific project.

Will the chemicals harm my plants or landscaping?

No. We soak all nearby grass and landscaping with fresh water before applying any chemicals, and we continuously rinse greenery throughout the process to prevent chemical burns. Your plants are completely safe with our team.

How long before I can stain or paint after cleaning?

We recommend waiting 48 hours after the cleaning and brightening process to allow the wood to fully dry. Applying stain or paint to damp wood can trap moisture and lead to premature failure of the coating.

What types of wood can you clean and stain?

We clean and stain cedar, pine, redwood, pressure-treated lumber, and composite decking. Each wood type requires specific dilution ratios and techniques — we'll assess your wood during the free estimate and recommend the right approach.

Ready for Fence & Deck Cleaning, Staining & Painting?

Get your free, no-obligation quote today. We'll review your property and provide an honest, upfront price.